Fusion 4 Series Controllers are the most powerful relay controllers we currently manufacture.
Capable of controlling relays from a computer, sensor readings, or a time schedule, Fusion 4
controllers can be used to automate just about any application. Choose a controller based on
the quantity and power rating of relays your application requires.
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor
and send a message to a server to do just about anything you want... from anywhere in
the world. Push Notification series controllers send messages from real-world electronics to
computers and servers.
Newer Fusion Series controllers are available to replace the older Reactor Series controllers.
Because of the wide usages of the older Reactor Series products, they will not be discontinued; however,
firmware and Base Station support will no-longer evolve to include minor changes and improvements.
Sensor Controlled Relays: Reactor Series
Activate Relays and Events when Sensors Reach specified Limits.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself.
Manual computer control optional.
Control Relays through Built-In Web Relay Interface
Read A/D Inputs
Onboard Ethernet Interface
- Plugs directly into Router
- Use Netgear adapter for Wi-Fi
- Full ProXR Command Set
- Expandable to 256 relays
Built-In Working Web Pages
- Page for turning relays on/off
- Page with meters for reading sensors
- Plus Many More!
Web Relay Control with Web Interface
The Web Relay is equipped with firmware built into the board that will allow you to Control relays with a web page. The web relay controllers have a web page
built into the module that you can access through your local network or internet.
Control By Web!
The Web Relay is an ideal choice for applications that require you to control relays by the web, and it's extremely easy to work
with since the working web pages are already in the module.
Simple Reliable Web Relay Control Control relays through your LAN or over the internet.
Ready to use web pages are built into the Ethernet module Simply Access the Web Page & Trigger Relays!
Web Pages Allow You to Control Relays Easy Setup - Just Plug Into Your Router Control Relays with your LAN or Internet connection
Selecting The Web Interface
By selecting the Web Relay
interface you will be sending commands through your local area network or internet to the board. Boards on this page are equipped with a
Web-i communications module that adds Ethernet communications to the board. The board will plug directly into your router where it is assigned
an IP address. Once the IP address has been assigned you can access the pages built into the module and trigger relays.
Selecting a Web Relay Board
Below you will find the 4-channel Web Relay Controllers that are available. The difference being the amperage of the relays
installed and the type of relay. Choose the controller that fits the amperage you are switching. You will find SPDT relays
in the 5, 10 and 20 amp versions and an SPST version in the 30 amp version. DPDT versions are also available with 1, 3 or 5 amp relays installed. For more information on selecting the correct relay for your application see
Choosing a Proper Amperage.
Selecting a Web Relay Series
The Web Relay boards are available in the ProXR Lite and ProXR versions. Both versions have the same firmware installed and accept the same ProXR command set, the industry leading command set for controlling relays. The ProXR lite version is non-expandable, the ProXR version is expandable to 256 relays.
When you find your controller click on the Full Description link to view full specs, watch setup videos, download software