Fusion 4 Series Controllers are the most powerful relay controllers we currently manufacture.
Capable of controlling relays from a computer, sensor readings, or a time schedule, Fusion 4
controllers can be used to automate just about any application. Choose a controller based on
the quantity and power rating of relays your application requires.
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor
and send a message to a server to do just about anything you want... from anywhere in
the world. Push Notification series controllers send messages from real-world electronics to
computers and servers.
Newer Fusion Series controllers are available to replace the older Reactor Series controllers.
Because of the wide usages of the older Reactor Series products, they will not be discontinued; however,
firmware and Base Station support will no-longer evolve to include minor changes and improvements.
Sensor Controlled Relays: Reactor Series
Activate Relays and Events when Sensors Reach specified Limits.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself.
Manual computer control optional.
802.15.4 Relays offer excellent speed, and reliability with minimal integration time with a standard range of 300' and an extended range option of 1 mile.
This wireless Relay uses an 802.15.4 wireless modem (available at checkout) connected to the USB port of your computer to communicate. The modem
supports any available COM port at any standard baud rate, allowing easy integration into any program that support serial communications.
Wireless Relay Options
802.15.4 Relays are available with SPDT 5, 10 and 20 amp, SPST 30 amp and DPDT 1, 3 & 5 amp relays installed.
Wireless Results - Without Having to Learn a Wireless Protocol These 2-Channel Relays can wirelessly trigger relays up to 1 miles from a modem connected to
the USB port of your PC! Wireless Relay, by simply sending commands to your USB port!
Reliable 2 mile standard module
- Up to 15 mile available
Onboard XSC interface module
- requires XSC modem
Line of Sight Operation
Wireless Relay Control
Easy Programming in Almost Any Language Base Station Software Gets You Up And Running Fast Wireless Relay Control with the Industry Leading Command Set
Selecting The Wireless Interface
By selecting the 802.15.4 interface you will be sending commands through a modem connected to the USB port of your computer. Boards on this page
are equipped with a 802.15.4 communications module that adds long range wireless communications to the board.
Selecting an Wireless Relay Board
Below you will find all the 2-channel 802.15.4 ProXR Lite baords that are available. The difference being the
amperage of the relay and the type of relay installed. Choose the controller that fits the amperage you are switching. You will find
SPDT relays in the 5, 10 and 20 amp versions and an SPST version in the 30 amp version. For more information on selecting the correct relay for your application see
Choosing a Proper Amperage.
Selecting an Antenna
The Standard Range Antenna with a distance of 300' is included with the price of the controller. If you are looking for longer
distances a 1 mile range option is available at checkout.
Selecting a Wireless Relay Series
The Relay boards are available in the ProXR Lite and ProXR versions, this page is the ProXR Lite versions. Both versions have the same firmware installed and accept the same ProXR
command set, the industry leading command set for controlling relays. The ProXR Lite version is non-expandable, the ProXR version is
expandable to 256 relays. When you find your controller click on the Full Description link to view full specs, watch setup videos, download
software and purchase.