| The
STP stepper motor controller boasts many features, making it
the ideal choice for most stepper motor control applications.
Base features include terminal block connections, optoisolated
RS-232 input, four LED coil trigger lights, and 1200 or 9600
baud operation.
The on-board Hexfet* driver
stage is capable of driving four coils up to 2 amps while
maintaining low heat dissipation in a small footprint.
Motor coils are driven in
direct correlation to data sent. The user sends data to
the controller to control the activation of each coil on the
stepper motor. This method offer complete flexibility
for controlling most stepper motors.
Based on the NCD-110, this
device can be chained with up to 15 other devices using the
NCD-110 architecture. Network the STP on a
single serial port with our 8-Relay
controller, 8SC input scanner, AD8
A/D converter, and much more.
The RSB
booster may be required when driving several NCD products from
a serial port. Operates from 9-18 volts DC. Compatible
with most 5, 6, and 8-wire stepper motors.
Not for use with bipolar
(4-wire) stepper motors.
|