The latest version of the ProXR Series have interchangeable communications modules that can be swapped at will. Simply disconnect all power from the board and pull off one module and replace it with another.
ZigBee Relays with ProXR Firmware at a Glance
Expandable to control up to 256 Relays using the XR Expansion Port
16 Background Timers Can be Assigned to Any of the Relays while Processing Your Commands
Server Reboot, Watchdog, & Keep Alive Duration/Pulse Timing Command Set
2400 to 115.2K Baud Networking Wireless Serial Connection for High Speed Switching
The ZigBee Coordinator connected to your computer sends commands to
remote devices and can bounce signals off of "router" modules if a device is
out of range.
Control One Relay at a Time or All 256 Relays at Once with Manual and Automatic Refreshing ProXR Command Set
Fusion 4 Series Controllers are the most powerful relay controllers we currently manufacture.
Capable of controlling relays from a computer, sensor readings, or a time schedule, Fusion 4
controllers can be used to automate just about any application. Choose a controller based on
the quantity and power rating of relays your application requires.
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor
and send a message to a server to do just about anything you want... from anywhere in
the world. Push Notification series controllers send messages from real-world electronics to
computers and servers.
Newer Key Fob Solutions are available to replace the Reactor Key Fob
Series controllers. Please see the new Key Fob Relays section on the Left Navigation of our web site.
Because of the wide usages of the older Reactor Key Fob Series products, they will not be discontinued;
however, firmware and Base Station support will no-longer evolve to include minor changes and
Remote Controlled Relays: Key Fob Series
Activate Relays with a Remote Control Key Fob. Trigger Timers,
Counters, and Events. Manually Take Control of Relays from Anywhere in the World using a
Computer as needed.
Newer Fusion Series controllers are available to replace the older Reactor Series controllers.
Because of the wide usages of the older Reactor Series products, they will not be discontinued; however,
firmware and Base Station support will no-longer evolve to include minor changes and improvements.
Sensor Controlled Relays: Reactor Series
Activate Relays and Events when Sensors Reach specified Limits.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself.
Manual computer control optional.