Wireless Control is as Easy as Talking to a USB Port on Your Computer!
All The Features You Need...
Mounts as a Virtual COM Port
Plug In, Open the COM Port and Start Sending Commands
Programmable Baud Rate
Not Compatible with all devices, Select the Modem for Your Wireless Protocol You are Using
LED Status Lights Indicate Communication
USB Powered
Includes USB Cable
Includes Enclosure
Wireless Modem 802.15.4, XSC and ZB ZigBee
Communicating with a Wireless Device does NOT have to be complicated. Our line of wireless modems allow first time users to communicate with the wireless protocol installed oh your board.
USB Computer Connection
Plug the wireless Modem into a USB port on your computer and install the drivers. The modem will mount as a COM port on your PC. Next, talk to the COM port as though you were communicating with a RS-232 serial device that is directly connected to your PC. That's all there is to it!!!
2-Way Communications
All wireless Modems offer wireless 2-way communications, compatible with any boards on this site with the same wireless protocol. These devices are Powered by the USB Port. The modems includes USB Cable and Enclosure.
Modems with part number ending in ZIGMO will feature our new case for modems with an external antenna and is wall mountable, smaller and features status lights so you'll know you're connected.
Wireless Control is as Easy as Talking to a USB Port on Your Computer!