Wireless Mir-X Relay

Wireless Contact Closure Switching up to 1000 Feet

All The Features You Need...

• 802.15.4 Operation Sold in Pairs
• Each Device Controls the Other Device
   - Local Inputs Control Remote Relays
   - Remote Inputs Control Local Relays
• 802.15.4 Wireless Operation up to 15 Miles
   - 300' Standard Range
   - 1 Mile w/External Antenna option
   - 2 Mile w/External Antenna option
   - 15 Mile w/External Antenna option
• Line of Sight Operation
• Contact Closure Inputs & Outputs at Each Location
• No Computer, No Programming, No Set-Up
• Works Together Right Out of the Box!

Wireless Mir-X Relays
Unique Contact Closure Switching

Mir-X Relays are equipped with firmware built into the board that will allow contact closure inputs to control contact closure outputs in a remote location. The Mir-X Relays are sold in pairs and each device has contact closure inputs and relays, what's different is that the contact closure inputs control the relays on the other device.  This easily allows contact closure switching in a remote location through a wireless connection.
Boards you selected are at the bottom of the page.

No Set-up, No Configuration...
Works Right Out of the Box!

The Mir-X Contact Closure Relay Controllers are ready to go to work right out of the box. Just Simple, Reliable Communications between two devices. Simply connect a Contact Closure input and the relay on the remote board will trigger!

Other Contact Closure Relay Options:

MirC Relay Pair

Contact Closure Relay

Category Link: MirC Relay

Sender Controls Receiver Device   - Contact Closure Inputs on Sender   - Relay Outputs on Receiver Wired, Wireless & Internet Operation No Programming Required

Reactor Relays

Accepts Variable Inputs

Category Link: Reactor Controllers

Contact Closure Input Compatible Variable Input Sensor can Trigger Relays at any Defined Point Works without a Computer Configure with Included Software Software Can Trigger Relays

ProXR Lite Relays

User-Programmable Controller

Category Link: ProXR Lite

8 Inputs on Controller Contact Closure Inputs Variable Input Detection Built-In Temperature Sensor Write Your Own Program to Send Commands to Board

N-Button Lite Software

Desktop Contact Closure

Category Link: N-Button Lite Software

Read Status of Contact Closure Inputs Meters Measure Variable Input Trigger Rlays with Desktop Button Trigger Multiple Relays per Button Compatible with ProXR Boards

The Simplicity of MirX In A Wireless Version

No Computers, No Configuration - Works Right Out of the Box
Inputs on one Controller activate the Relays at the Other Controller
Reliable Two-Way Communications Between Married Pairs

Two Boards Working Together

Every MirX controller is equipped with contact closure inputs and outputs. The inputs on one controller activate the relays on the remote device using wireless communications. The "X" in MirX refers to the crossover. Since both devices are equipped with contact closure inputs and relays, each device targets and controls the remote device.

MirX devices are only sold as a permanently married pair, pricing shown on our web site indicates pricing for the pair of controllers.  Go to the bottom of the page to see your selection of Bluetooth Mir-X Boards

Wireless Range

MirC controllers use different wireless communication technologies giving them ranges of 300 Feet (Short Range), 1-Mile, 2-Mile and up to 15 Miles (Long Range). The wireless protocol will be an 802.15.4 that's FAST, easy to use, and surprisingly reliable. The 300 foot module will be the default module and the prices shown on the web site will reflect this module. The other modules will be available at checkout if you would like to upgrade to a longer range. These ranges are based on a clear line of sight between MirC controllers/antennas, meaning obstacles such as trees, buildings and walls may limit these ranges slightly.

Relay Status

Wired Mir-X devices feature SPDT & SPST and Solid State relays in four different amperage options and are available with the same number of contact closure inputs as there are relays installed on the device.  Contact Closure Inputs may only be connected to switches, buttons, or sensors with Contact Closure capability.  Not suitable for use in voltage detection applications.

Who's Qualified to Use the Mir-X Series?

Anyone. The Mir-X Series Controllers are the most consumer friendly devices we offer. Weather you are an electronics engineer or home hobbyist, anyone is qualified to use the Mir-X Series controller.

Easy Board Selection

More Mir-X Options MirX Relays Shop MirX Relays Here Find the board you need by using the interactive menu below. The Communication Protocols are to the left, this is how the two boards will communicate with each other. Once you decide how they will communicate then select the number of contact closure inputs/relays you would like on the boards. You will be taken to another page where you can simply simply select the board with the correct amperage for the item you are switching. Computer Interface: Number of Relays on Controller: Internet Relay Control with Global Access Network/Interned Based Contact Closure Controlled Relays 1 2 4 8 Solid State Relays Wireless Option Wireless Contact Closure Controlled Relays 1 2 4 8 Solid State Relays Secure/Encrypted Wireless Contact Closure Controlled Relays 1 2 4 8 Solid State Relays Wired Option Direct Wired Contact Closure Controlled Relays 1 2 4 8 Solid State Relays

Find the board you need by using the interactive menu to he right.  Hover over the Button and select the communication protocol and then the number of inputs/relays you would like installed.

Current selection at bottom of this page now

Relay Status

Each device is also equipped with LEDs that display the status of the remote relay. Status information is verified using 2-way communications. If communication is lost between the two devices, the sending device will turn off the LED. Additionally, every MirX controller is equipped with a Busy/Ready LED. If the Busy LED flashes, this indicates the remote device has successfully received and accepted your contact closure status. If the Busy LED does not flash, the remote device is out of range.

Multiple Mir-X Pairs?

Multiple Mir-X Controllers can be used in one locations. One Pair of Mir-X controllers will not interfere with another Mir-X pair as they are isolated through the way they are designed. Mir-X Devices are paired together before shipment and will only communicate to each other, for this reason they will not interfere with other Mir-X controllers.

Contact Closure Inputs

A Mir-X controller has as many inputs as it has Relays. So a pair of 4 relay Mir-X controllers will have 4 relays on each board and 4 inputs on each board which are used for controlling the relays on the opposite Board, the same holds true for 1, 2, and 8 relay versions.

Mir-X 8-Input Screw Terminal - 8 inputs are only available on 8-Channel Mirx boards

Relay Outputs

Mir-X 4-Output Screw Terminal with Normally Open, Normally Closed and Common are available for each relay. 20 and 30 amp boards will connect directly to the relays. The 30 amp is a SPST relay and only has Common and normally open.  For more click here

Mir-X Controllers have 1, 2, 4, or 8 Relays integrated into the circuit board. A relay is similar to a switch. The only difference between a switch and a relay is the actual mechanism for changing the on/off status of the switch. On a switch, you manually push on a piece of metal or plastic to operate the switch. On a relay, an electric current is used to operate the switch. Relays do NOT provide a voltage output. They provide a contact closure output, exactly like the terminals found on a light switch at your local hardware store. Wiring to a relay will be slightly different depending on the model of Mir-X controllers you choose.

Attention: No Voltage Input

Please Note: Users must NEVER apply any voltage to an input on the Mir-X controller, these inputs are for Contact Closure connections only.

Attention: Relays Provide No Voltage Output

Please Note: Relays do NOT provide a voltage output. They provide a contact closure output, exactly like the terminals found on a light switch at your local hardware store. Wiring to a relay will be slightly different depending on the model controller you choose.
For wiring information see our Relay Logic page.

Wireless Contact Closure Switching up to 1000 Feet

Displaying 1 - 7 of 7 Products in this Category.

Sort By:  Select an Option... Price: Low-High Price: High-Low Product Code: A-Z Product Code: Z-A

Display Page:     ( 1 ) 

MirXSSR1x_ZRS

• 1 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR1x_ZRS: $186.00/ea

 

MirXSSR2x_ZRS

• 2 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR2x_ZRS: $206.00/ea

 

MirXSSR2x_ZRS_MIX

• 2 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR2x_ZRS_MIX: $206.00/ea

 

MirXSSR4x_ZRS

• 4 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR4x_ZRS: $338.00/ea

 

MirXSSR4x_ZRS_MIX

• 4 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR4x_ZRS_MIX: $338.00/ea

 

MirXSSR8x_ZRS

• 8 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR8x_ZRS: $418.00/ea

 

MirXSSR8x_ZRS_MIX

• 8 路继电器
• Optional 安培 Solid-State
• Serial 通讯
• 用途: SS 开关
• MirX 系列 扩展接口
• 更多内容

MirXSSR8x_ZRS_MIX: $418.00/ea

 

Sort By:  Select an Option... Price: Low-High Price: High-Low Product Code: A-Z Product Code: Z-A

Display Page:     ( 1 )