Simply enter the IP address of the device in any browser and you are talking to the controller and any attached Expansion Boards from a LAN Connection. Enter the MAC address of the module into link.signalswitch.com in the format http://link.signalswitch.com/macAddress and control the board from anywhere in the world. Eight Analog to digital inputs are located on the right side of board.
Web-i with A/D at a Glance
Control this Device Remotely from Anywhere in the World
Simply enter http://link.signalswitch.com/MacAddress into the URL (requires port forwarding on your router)
Internet or LAN Controlled Web Relays
Bookmark the Browser Interface from your phone to run it like an App
Supports Communication with multiple devices at the same time
Supports Direct Internet Access Without link.signalswitch (this requires Static IP Address)
No static IP Required for normal operation
Includes Extensive Network Configuration Options
Supports DHCP and Fixed IP Address
Password Protection
Full compatibility with the ProXR Command Set
8-Channel of 8/10-Bit Analog to Digital Conversion
The ProXR Series Controller allow computers to read contact closure inputs, analog to digital converters and control up to 256 Relays using a single computer interface. ProXR series controllers focus on expansion for industrial control applications.
The ProXR Lite product line allows computers to read up to 8 analog inputs and control up to 8 relays.
Non-Expandable, the ProXR Lite Product Line focuses on interchangeable Computer Interface Modules and Low Cost
Focusing on Cost Reduction and High Volume Manufacturing, the Low Cost Series are No-Frills Relay Controllers that offer Basic Computer Control at Low Communications Speed.
Android Relays use wireless and internet technologies to communicate with your android smart phone or tablet through free apps available on Google Play. More Coming Soon
Activate Relays when Sensors Reach Limits. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Activate Relays with a Remote Control Key Fob. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Key Fob Reactor, then Let the Key Fob Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Time Schedule Activated Relays with Computer Interface. Use a Computer to Setup the Time Schedule.
Taralist Series Controllers do not require a computer after initial configuration.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
The MirC Product Line Consist of TWO Controllers, Offering Contact Closure Inputs in One Location that Control Relays in a Remote Location.
The Transmitter Shows the Status of the Receiver. Smart Features optionally Turn Off Remote Relay if Communications is Lost. Sold in Pairs ONLY.
The MirX Product Line Consist of TWO Controllers, Offering Contact Closures and Relays on Each Controller. The Contact Closure Inputs at Location A control Relays at Location B. The Contact Closure Inputs at Location B control Relays at Location A. Each Controller Remotely Controls the Other. Smart Features optionally Turn Off Relays if Communications is Lost between the Two Controllers. Sold in Pairs ONLY.