Ethernet Relay will Allow Computer Controlled Switching from Any Computer Connected to a 10/100 Ethernet Network. The Ethernet Relay Board
Connects to the EthernetPort of your Local Network Hub, Allowing Computer Controlled Switching from Anywhere on the Network.
Ethernet Relay Options
Ethernet Relays are available with SPDT 5, 10 and 20 amp, SPST 30 amp and DPDT 1, 3 & 5 amp relays installed.
Ethernet Relay Features the new Lantronix Ethernet Module Extremely Powerful, Very Reliable Relay Control!
Ethernet Relay Features
Relays installed on a Circuit Board
Onboard Ethernet Interface Module
- Plugs Directly into Router
Network Communication Options:
- Virtual COM Port over Ethernet
- Direct TCP/IP Communications
- Supports DHCP
- Supports Fixed IP Address
Industry Leading Command Set
- Send Specific Commands to Trigger Relays
- Trigger Any or All Relays
- Program in Almost any Language
Base Station Software
- Point & Click Interface
- Use to Discover Board on Network
- Read Sensor Levels
- Read Status of Relays
- Manually Trigger Relays
Plugs Directly Into Router
Plug the standard CAT5 cable into your router where it is assigned an IP address and you can send commands to the board over your network.
Ethernet Relay Control Send commands to trigger a relay, a bank of relays or all relays at once, expandable to 256 relays! Choose How Many Relays You Need Below
Selecting an Ethernet Relay
How many relays do you need? Below you will find all the Ethernet Relay Control that are available. Each section
is broken down by the number of relays installed on the board. Choose how many relays you require and click that link. This will
bring you to a page where you will select a board by how many amps you are switching. Ethernet Relays are available with up to 32 relays
onboard but they can be expanded up to 256 total relays.
Fusion 4 Series Controllers are the most powerful relay controllers we currently manufacture.
Capable of controlling relays from a computer, sensor readings, or a time schedule, Fusion 4
controllers can be used to automate just about any application. Choose a controller based on
the quantity and power rating of relays your application requires.
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor
and send a message to a server to do just about anything you want... from anywhere in
the world. Push Notification series controllers send messages from real-world electronics to
computers and servers.
Newer Key Fob Solutions are available to replace the Reactor Key Fob
Series controllers. Please see the new Key Fob Relays section on the Left Navigation of our web site.
Because of the wide usages of the older Reactor Key Fob Series products, they will not be discontinued;
however, firmware and Base Station support will no-longer evolve to include minor changes and
Remote Controlled Relays: Key Fob Series
Activate Relays with a Remote Control Key Fob. Trigger Timers,
Counters, and Events. Manually Take Control of Relays from Anywhere in the World using a
Computer as needed.
Newer Fusion Series controllers are available to replace the older Reactor Series controllers.
Because of the wide usages of the older Reactor Series products, they will not be discontinued; however,
firmware and Base Station support will no-longer evolve to include minor changes and improvements.
Sensor Controlled Relays: Reactor Series
Activate Relays and Events when Sensors Reach specified Limits.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself.
Manual computer control optional.