Our customers have been asking for a Bluetooth Relay and Bluetooth control for several months now. We have been researching Bluetooth options and have finally settled on integrating SENA Bluetooth modules into our product line. They offer excellent communication range, speed, and reliability with minimal integration time. Simply pair our Bluetooth controller with your laptop, PDA, desktop, or other system, and you will be talking to the device as though it were directly connected to the RS-232 port of your computer (supports 115.2K Baud operation). Current versions offer Relay Control +
8-Channels 8/10-Bit A/D, or Relay Control +
UXP Expansion Port. All versions include an
XR Expansion Port for adding additional relay banks. Using our
Standardized ProXR Command Set, it's easy to upgrade to a Bluetooth interface if you are using our other interface options.
Latest Advancements
All our Bluetooth control devices will contain the latest advancements in signal switching as part of our ProXR series of controllers! The ProXR Series is capable of controlling up to 256 relays. Whether you need power switching or DPDT signal switching, the ProXR Series are built from the ground up with Expansion in mind. Simply Chain the
XR Expansion Modules, one after another, to meet your computer controlled switching requirements. For more detailed information and to order, please click on the links below.
Control Relays with a Cell Phone!
ProMOTE is an exclusive FREE program that allows you to control any NCD Bluetooth ProXR controller with your cell phone, PDA, Laptop, or Desktop computer! That's right, use you cell phone as a remote!! Fully programmable the ProMOTE software allows you to configure your own buttons for instant computer control WITHOUT software development! The ProMOTE Software now ELIMINATES THE NEED FOR PROGRAMMING! Simply download and install the free software, configure the buttons to fit your needs and your ready to go. With no drivers required for the Bluetooth Connection and no programming for the control, what could be easier! For more information visit our
ProMOTE Page.
The ProXR Series Controller allow computers to read contact closure inputs, analog to digital converters and control up to 256 Relays using a single computer interface. ProXR series controllers focus on expansion for industrial control applications.
The ProXR Lite product line allows computers to read up to 8 analog inputs and control up to 8 relays.
Non-Expandable, the ProXR Lite Product Line focuses on interchangeable Computer Interface Modules and Low Cost
Focusing on Cost Reduction and High Volume Manufacturing, the Low Cost Series are No-Frills Relay Controllers that offer Basic Computer Control at Low Communications Speed.
Activate Relays when Sensors Reach Limits. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Activate Relays with a Remote Control Key Fob. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Key Fob Reactor, then Let the Key Fob Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Time Schedule Activated Relays with Computer Interface. Use a Computer to Setup the Time Schedule.
Taralist Series Controllers do not require a computer after initial configuration.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
The MirC Product Line Consist of TWO Controllers, Offering Contact Closure Inputs in One Location that Control Relays in a Remote Location.
The Transmitter Shows the Status of the Receiver. Smart Features optionally Turn Off Remote Relay if Communications is Lost. Sold in Pairs ONLY.
The MirX Product Line Consist of TWO Controllers, Offering Contact Closures and Relays on Each Controller. The Contact Closure Inputs at Location A control Relays at Location B. The Contact Closure Inputs at Location B control Relays at Location A. Each Controller Remotely Controls the Other. Smart Features optionally Turn Off Relays if Communications is Lost between the Two Controllers. Sold in Pairs ONLY.