Selecting The Wireless 802.15.4 Interface
By selecting the
802.15.4 interface you will be sending commands through a modem connected to the USB port of your computer. Boards on this page are equipped with a
802.15.4 communications module that adds wireless communications to the board. Time configurations can be uploaded to
the board through a wireless wireless connection using the included Base Station Software.
Selecting a Wireless Time activated Relay
Below you will find the -channel Wireles Time Activated Relays that are available. The difference being the amperage of the relays
installed and the type of relay. Choose the controller that fits the amperage you are switching. You will find SPDT relays
in the 5, 10 and 20 amp versions and an SPST version in 30 amp. For more information on selecting the correct relay for your application see
Choosing a Proper Amperage
Easy Board Selection
Shop Time Relays Here
TaraList: Time Controlled Relays
Time Schedule Activated Relays with
Computer Interface. Use a Computer to Setup the Time Schedule.
Taralist Series Controllers do not require a computer after initial
Manually Take Control of Relays from Anywhere in the World using a Computer as
Find the board you need by using the interactive menu to he right. Hover
over the Button and select the number of relays you want installed and then
select the computer interface you need. Once there simply select the board with
the correct amperage for the item you are switching.