Wireless Relay Control
Easy Programming in Almost Any Language
Base Station Software Gets You Up And Running Fast
Wireless Relay Control with the Industry Leading Command Set
Selecting The Wireless Interface
By selecting the 802.15.4 interface you will be sending commands through a modem connected to the USB port of your computer. Boards on this page
are equipped with a 802.15.4 communications module that adds long range wireless communications to the board.
Selecting an Wireless Relay Board
Below you will find all the 32-channel 802.15.4 ProXR baords that are available. The difference being the
amperage of the relay and the type of relay installed. Choose the controller that fits the amperage you are switching. You will find
SPDT relays in the 5, 10 and 20 amp versions and an SPST version in the 30 amp version. For more information on selecting the correct relay for your application see
Choosing a Proper Amperage
Selecting an Antenna
The Standard Range Antenna with a distance of 300' is included with the price of the controller. If you are looking for longer
distances a 1 mile range option is available at checkout.
Selecting a Wireless Relay Series
The Relay boards are available in the ProXR Lite and ProXR versions, this page is the ProXR versions. Both versions have the same firmware installed and accept the same ProXR
command set, the industry leading command set for controlling relays. The ProXR Lite version is non-expandable, the ProXR version is
expandable to 256 relays. When you find your controller click on the Full Description link to view full specs, watch setup videos, download
software and purchase.