802.15.4 Wireless Relay
Easy Programming in Almost Any Language
Base Station Software Gets You Up And Running Fast
Wireless Relay with the Industry Leading Command Set
Selecting The 802.15.4 Interface
By selecting the
802.15.4 interface you will be sending commands through a modem connected to the USB port of your computer. Boards on this page are equipped with a
802.15.4 communications module that adds wireless communications to the board.
Selecting a Wireless Relay Board
Below you will find all the 802.15.4 Relay Boards that are available. The difference being the amperage of the relays
installed and the type of relay. Choose the controller that fits the amperage you are switching. You will find SPDT relays
in the 5, 10 and 20 amp versions and an SPST version in 30 amp. DPDT versions are also available with 1, 3 or 5 amp relays installed. For
more information on selecting the correct relay for your application see
Choosing a Proper Amperage
Selecting an Wireless Relay Antenna
The Standard Range Antenna with a distance of 300 feet (91m) is included with the price of the controller. If you are looking for longer
distances a 1 mile (1.6km) range option is available at checkout.
Selecting a Wireless Relay Series
802.15.4 Relay boards are available in the ProXR Lite and ProXR versions. Both versions have the same firmware installed
and accept the same ProXR command set, the industry leading command set for controlling relays. The ProXR Lite version is non-expandable, the ProXR version is expandable to 256 relays.
When you find your controller click on the Full Description link to view full specs, watch setup videos, download software