Product Discontinued
This product has been replaced by ZUXPR83DPDTPROXR_ZETH-ME
Ethernet Relay with ME Firmware & DPDT Relays
Discontinued - This item has been replaced by a new Item, see product description for details
Product Code: NEUXPR83DPDTPROXR
Control this Device Over the Internet
Signal Switch Compatible
Discontinued - This item has been replaced by a new Item, see product description for details
$320.00/eaSimply connect this Ethernet Board to the Ethernet Port of your computer or to a networked Ethernet outlet and power up the device. In no time you'll be talking to the board. Add Contact Closure, Potentiometer, or A/D Conversion modules with the UXP Expansion Port. Add Relay Expansion Boards to the XR Expansion Port.
Ethernet ME with UXP Port at a Glance
- Supports Virtual COM Port over Ethernet
- Supports Direct TCP/IP Communications
- Supports Direct Connection to SignalSwitch.com
- Includes Extensive Network Configuration Options
- Supports DHCP
- Web-Browser Interface for Network Configuration
- Supports Fixed IP Address
- Password Protection
- Offers 100% Emulation of ProXR AD8 Firmware
- UXP Expansion port for Adding Additional:
- Contact Closure Modules
- Digital Potentiometers
- Analog to Digital Conversion Modules
Video Resources
(Select a thumbnail to view the video)Introduction to Ethernet
Learn about Ethernet Communications and how it is utilized by our Relay Controllers
Ethernet Setup
Watch as we show you how to Set Up the Hardware and explain your options for the Software necessary to Communicate to your Controller
Web-i Introduction
Get started with Web Control
Virtual Serial Port Setup
Learn how to use Digi Realport to Set Up a Virtual Com Port to communicate to your Networking Relay Controller
Introduction to Relay Control
Learn how computer controlled relays communicate and control
Intro to Wired Communications
Learn the basics of wired communications and find the right wired controller for your application
Induction Suppression
Learn about Induction Suppression and how to counter it using Capacitors
Introduction to A/D
Learn about Analog to Digital Conversion and its uses
How to Find the Com Port
Learn how to find the Com Port that your Device is using
About Expansion Ports
Learn about the Expansion Options available to use with our controllers
Resources:
This Product:
NEUXPR83DPDTPROXR
| Ratings | AC | DC |
|---|---|---|
| Voltage | 120 | 12 |
| Amperage | 3 | 3 |
|
Discontinued - This item has been replaced by a new Item, see product description for details |
| Stock#: NEUXPR83DPDTPROXR | |
| 1-9 | $320.00 |
Related Products:
NEUXPR81DPDTPROXR
 |
Discontinued - This item has been replaced by a new Item, see product description for details |
| Stock#: NEUXPR81DPDTPROXR | |
| 1-9 | $300.00 |
NEUXPR85DPDTPROXR
 |
Discontinued - This item has been replaced by a new Item, see product description for details |
| Stock#: NEUXPR85DPDTPROXR | |
| 1-9 | $340.00 |
Questions?
At AccessNCD we give you access to NCD technicians, developers and other customers! Our highly trained technicians and developers responding are the same ones designing and using these boards. If you are working on a sensitive project your questions can be posted privately without being posted to the public forum. Visit Today!
Shipping and Payment Information
Warranty Information
National Control Devices, LLC www.controlanything.com Since October, 1995 .
Here's What People Are Saying!
"The controller arrived and works well! It has been interesting exploring the different ways to connect to it and use it."
Ethernet User
Ethernet ME Firmware with UXP Expansion
Uses Digi Stock Digi Connect ME firmware.
Providing a low-cost network communications solution to NCD Devices.
We have just taken Network Communications a Huge Step Forward!
For several years now, NCD has been the Only maker of a powerful Ethernet Relay Controller, but now it's time for a New Generation of Controllers. We have just taken Network Communications a Huge Step Forward by Offering a Low-Cost and a High-Power Network Communication Solution.
Two Ethernet Modules Available |
|||
 |
 |
||
ME Firmware |
Web-i Firmware |
||
Ethernet Network Module
This Ethernet relay controller is based on the Digi Connect ME Ethernet communications module. This is a great low-cost solution that has empowered our users since 2005. The Digi Connect ME firmware allows you to login to the device and setup powerful network communication options. Though it does not offer a web browser interface for relay/device control, it does offer many powerful connectivity options for advanced networks at a very low cost. ME Firmware supports Virtual COM Port Ethernet Communications, Direct TCP/IP communications, or direct communication to SignalSwitch.com. ME Firmware is only capable of handling only one of these communication options at a time however.Easy Software Development
RealPort Virtual COM Port drivers map a Network IP address to a COM port on your network...allowing you to control this device as though it were directly connected to a serial port on your PC. So network control is now as easy as speaking to a COM port on your local computer....except this device works over the network. This device also supports Telnet and Data Encryption with Password Protection. This device includes a Digi Connect ME Ethernet Interface and Embedded Web Server from www.digi.com.Many Communication Protocols for Advanced Users
Advanced users may want to employ other communication protocols to speak the the Ethernet Relay Controller. NCD Ethernet Relay Controllers can also be controlled using Telnet. I.P. Addresses and are automatically or manually assigned. NCD Ethernet Relay Controllers also support security protocols such as Shared Key, WEP, WPA, and Cisco LEAP with support for WEP, TKIP, and CCMP data encryption.About ProXR
If you are new to our products, we would like to introduce to you is a term we call "ProXR". ProXR refers to a set of standardized commands used for computer control and data collection. A controller that supports the ProXR command set is a controller that is built to control up to 256 relays, using commands that can be sent to any controller that offers ProXR compatibility. This allows software developers to create programs for our products, then upgrade or change connectivity options without having to rewrite their software. ProXR commands can be sent to our controllers via the RS-232 serial port, the USB port, Wireless ZigBee, Ethernet, and Wi-Fi 802.11b...all without rewriting your software....simply develop your programs to work with the serial port of your computer. Let ProXR controllers manage the rest.
With all the control and backward/forward compatibility you have come to expect from the ProXR series command set, this controller allow you to send simple commands to activate relays, read the status of relays, activate up to 16 relay timers, and control up to 256 total relays using the XR expansion port. All relays are electronically latched, simply send a command to turn the relay on, send a different command to turn the relay off.
UXP Expansion Port
This board is equipped with a UXP Expansion port which allows you to add add capabilities beyond basic relay control to your application specifically for the purpose of speaking to various expansion modules. Where the XR Expansion port allows you to add additional relays to the board, the UXP Expansion Port allows you to add functionality to the board. With the UXP Expansion Port you can add Digital Potentiometers, Contact Closure modules and Analog to Digital Expansion Modules to this board.
Wi-Fi Adapter Available
Make this Ethernet controller Wi-Fi compatible by simply connecting the Netgear WNCE2001 Universal Wireless Internet Adapter. The WNCE2001 will
connect any NCD Ethernet device to an existing 802.11 wireless network. Installation couldn't be easier with Netgear's CD-less, wireless installation. The Netgear WNCE2001 can be purchased on your own or select the Wi-Fi option at checkout to add to your order.Ethernet with Web-i Framework
NCD Currently offers 2 variations of the Ethernet Modules. The Web-i with Web-Browser interface is also available.Web-i is our own breed of Ethernet communications. Web-i offers a powerful web-browser interface for direct control of relays from a web-page served directly to users from the Web-i module, without the need for a server. Web-i is accessible from anywhere on your local area network or from anywhere in the world. In addition to a web browser relay control interface, Web-i devices also allow you to control the device from your own software through direct TCP/IP communications while still hosting a web browser interface. Write software that directly accesses the controller or access the control from your web browser. Web-i also supports a simultaneous connection to SignalSwitch.com, allowing you to control the Web-i from our server, your program, or your web browser...all at the same time. Use the chart below to compare features of the ZETH-ME and Web-i Ethernet Modules. This board can be upgraded with the Web-i module during checkout.
| Feature Comparison: | ME Firmware | Web-i Firmware |
| Supports Virtual COM Port over Ethernet | YES | - |
| Supports Direct TCP/IP Communications | YES | YES |
| Supports Direct Connection to SignalSwitch.com | YES | YES |
| Supports Multiple Communication Methods (Above) Simultaneously |
- | YES |
| Supports Direct Internet Access Without a Server |
- | YES |
| Includes Extensive Network Configuration Options | YES | - |
| Web-Browser Interface for ProXR Series Controllers | - | YES |
| Web-Browser Interface for Reactor Series Controllers | - | YES |
| Web-Browser Interface for Taralist Series Controllers | - | YES |
| Web-Browser Interface for Network Configuration | YES | YES |
| Supports DHCP | YES | YES |
| Supports Fixed IP Address | YES | NO |
| Password Protection | YES | YES |
Resources
 |
NEW TO ETHERNET COMMUNICATIONS? GET STARTED HERE Click the above link for an exclusive article on Ethernet Communications |
| Ethernet Relay Article | Ethernet Article |
| Download Manual | Download Product Manual |
| Network Drivers | Network Drivers |
| NCD Component Library | The NCD Component Library is a Plug-In for Visual Studio 2005/2008 that greatly reduces software development time, effectively reducing most control operations to a single line of code. This free download includes many example applications covering a wide range of topics. |
| Wiring Diagrams | These wiring diagrams will help you understand how to connect to your devices and use relays as a form of control logic |
| Mechanical Drawing | Mechanical Drawing for this board |
Discontinued - This item has been replaced by a new Item, see product description for details | |
|
Quantity in Basket:
None
Code: NEUXPR83DPDTPROXR Price: $320.00 Shipping Weight: 1.00 pounds | |
| Discontinued - This item has been replaced by a new Item, see product description for details | |
Computer Control
Android Relays
iPhone Relays
Stand-Alone
Additional Products
Product Support
| SECURE SERVER |
|
Visit one of our other great web sites: www.SignalSwitch.com www.relaycontrollers.com |
English:  中文:  |
|
National Control Devices, LLCWorld's Largest Manufacturer of Computer Controlled Switching Devices Since 1995. |
|
Attention
Please Note: Our office will be closed for Memorial Day on May 28th.