Selections in bold are required.

There are one or more selections in bold that need to be selected.

This Item is Lead-Free RoHS Compliant :
RoHS Compliant

Please Choose a ZB ZigBee Mesh Wireless Option
What's This?:
XBee ZB low power ZigBee module w/ integrated wire antenna
XBee ZB low power ZigBee module w/ U.FL connector, Pigtail, and External Antenna ( +$24 )
XBee-PRO ZB long range ZigBee module w/ integrated wire antenna ( +$35 )
XBee-PRO ZB long range ZigBee module w/ U.FL connector, Pigtail, and External Antenna ( +$60 )

Please Choose ZB ZigBee Mesh Wireless Firmware Option
What's This?:
Router (Forwards Data to Other Devices & Acts as Device in the ZB ZigBee Mesh Network, Slower)
Endpoint (Faster, but Does Not Forward Data to Other Devices in the Network)

Do you have a ZB ZigBee Mesh Coordinator (used to talk to a ZB Mesh network)
What's This?:
USB AT ZB ZigBee Mesh Coordinator (Recommended) ( +$138 )
USB API ZB ZigBee Mesh Coordinator (For Advanced Users) ( +$138 )
No, I Already Have the REQUIRED ZB ZigBee Mesh USB Coordinator

NOTICE: NCD ZB ZigBee Mesh Devices are NOT an ideal learning platform for ZB ZigBee Mesh Networking. If you are NOT familiar with how ZB ZigBee Mesh devices work, a development kit is REQUIRED as it is not possible for NCD technical support to teach and fully support the ZB ZigBee Mesh Communications Protocol. Please order part number: 602-1184-ND from www.DigiKey.com for Learning about ZB ZigBee Mesh. NCD Devices are FULLY Compatible with this development kit. Please check the box to the left to indicate you are aware that technical support will only be available to customers who are using the ZB ZigBee Mesh development kit.

NOTICE: This device uses the ZB ZigBee Mesh Networking wireless communications protocol, and should not be confused with IEEE 802.15.4 wireless devices which look very similar, but do not work together.

I Understand this Device May Require up to 10 Business Days to Complete the Manufacturing and Testing Cycle

Do you need a Power Supply for this Device?
What's This?:
No Thanks, I Alread Have a +12VDC Power Supply
120VAC to 12VDC 1.25A 60Hz USA Computer Grade Regulated Power Supply ( +$24 )
100-240VAC to 12VDC 1.5A 50/60Hz International Computer Grade Regulated Power Supply with 4 Adapters ( +$36 )

24V to 12V Power Converter Option: Do you want to Power Your Controller at 24 Volts?
What's This?:
No Thanks, I already have a power supply solution
DC/DC Power Converter 24V DC Input to 12V DC Output at 5 Amps Wire to Wire ( +$19 )
DC/DC Power Converter 24V DC Input to 12 V DC Output at 5 Amps Wire to 2.1mm Male ( +$19 )
AC/DC Power Converter 24V AC Input to 12V DC Output at 5 Amps Wire to Wire ( +$19.92 )
AC/DC Power Converter 24V AC Input to 12V DC Output at 3 Amps Wire to 2.1mm Male ( +$19.92 )

Add Pluggable Connectors?:
No Thanks, Screw Terminal Connectors are Fine
Yes! Add Pluggable Connectors ( +$24 )

Do you need Induction Suppression Capacitors?
What's This?:
No Thanks, I'm switching a resistive load
Yes, Send 8 100VDC / 65VAC Capacitor ( +$15.92 )
Yes, Send 8 250VDC / 160VAC Capacitor ( +$19.12 )
Yes, Send 8 400VDC / 200VAC Capacitor ( +$27.92 )
Yes, Send 8 630VDC / 250VAC Capacitor ( +$39.12 )

Do you need a Enclosure for this Device?:
No Thanks!
Yes (Undrilled) ( +$19 )

Would you like a ZUSB Module to help during Setup and Troubleshooting? All customers are STRONGLY ADVISED to purchase at least ONE USB Communication Module. This communication module may be used to recover a controller or to reconfigure a controller should there be an accidental loss of communications. NCD Tech support may be unable to assist customers who do not have a USB Communications Module available for troubleshooting purposes.
What's This?:
No Thanks!
Yes, I need a ZUSB Module - 6' USB Cable Included ( +$35 )

ProXR Enhanced Firmware Installed:
V3.2 ProXR Enhanced 64MHz CPU 512 Relays 2,000,000 Baud Changeable Communications Interface

Do you need any Software for this Controller?:
No Software Needed
Yes! Please send N-Button Lite for the Limited Time Offer of just ( +$29 )
Yes! Please send N-Button Pro for the Limited Time Offer of just ( +$99 )

Would You Like Key Fob Control
Try our New Wireless Remote Control Key Fob Transmitter/Receiver integration kit. Simply remove the communication module from your NCD controller and replace it with the KFX Receiver and use the included 5-Button Key Fob to control relays from 750 Feet Away! Configure Key Fob buttons for momentary, toggle, flashing, or timed relay activation. Save $30 when Purchased with a NCD Relay Controller, just $149!
What's This?:
No Thanks, I Don't Need Key Fob Control
KFX Key Fob Wireless Remote Control Receiver/Antenna (No Key Fob or Integration Kit) ( +$69 )
KFX Key Fob Receiver/Antenna with Integration Kit and 5-Button Key Fob Transmitter ( +$149 )
Would You Like Key Fob Control</b><br/>Try our New Wireless Remote Control Key Fob Transmitter/Receiver integration kit. Simply remove the communication module from your NCD controller and replace it with the KFX Receiver and use the included 5-Button Key Fob to control relays from 750 Feet Away! Configure Key Fob buttons for momentary, toggle, flashing, or timed relay activation. Save $30 when Purchased with a NCD Relay Controller, just $149!<br/></b><a href="javascript:open_smallwindow('/kfx_module.htm')">What's This?</a>:
control anything... anywhere
Login   |   Logout
NATIONAL CONTROL DEVICES, LLC

Attention

We will be closed December 24th, 25th, and 26th.