Wireless 802.15.4 ProXR Enhanced with UXP:
Wireless 802.15.4 Relay Controller with
UXP Expansion Port and
XR Expansion Port
Take all the Power of the ProXR Series Relay Controllers...add a Digi Wireless 802.15.4 Compliant Interface: Remote Data Collection and Control is Effortless!
It works like this. Plug our Wireless 802.15.4 modem into the USB Port of your computer. The modem will mount as a COM port on your PC. Open the COM port and start sending data to the modem. The modem will forward your data to all Wireless 802.15.4 compliant devices within range (it is also possible to speak to a specific device when other controllers are in range).
This ProXR series controller offers wireless serial communications, requiring only a 12VDC Power Supply. Once powered up, the relay controller waits for a command. A command consists of a few bytes of data. Usually between 2 and 6 bytes. Once the command has been received, the controller processes the command, and sends you back ASCII character code 85 to signal the completion of your command.
Read More About Wireless 802.15.4 Communications
Our UXP Expansion Modules allow you to add A/D Converters, Contact Closure Inputs, or Potentiometer Outputs to this device. Along with this these boards also have the built in XR Expansion Ports Capable of controlling up to 256 relays from just one board. Whether you need power switching or DPDT signal switching, the ProXR Series with UXP Ports are built from the ground up with Expansion in mind
View our
UXP Expansions or our
XR Expansions to see all available options.About ProXR
If you are already using one of our ProXR series controllers connected to the Serial Port or USB Port, then you will not have to make any software changes. This device works as though it were directly connected to a serial port on your PC, offering 100% transparent wireless serial communications.
With all the control and backward/forward compatibility you have come to expect from the
ProXR series command set, this controller allow you to send simple commands to activate relays, read the status of relays, activate up to 16 relay timers, and control up to 256 total relays using the
XR expansion port. All relays are electronically latched, simply send a command to turn the relay on, send a different command to turn the relay off.
Read More About the ProXR Standard
About Universal Expansion Ports
If you need to add capabilities beyond basic relay control to your application, then you may want to consider using one of our controllers equipped with a UXP Expansion Port. UXP is a standardized data port, specifically for the purpose of speaking to various expansion modules. This Relay Controller is equipped with a UXP port, allowing you to take advantage of extended commands to speak to our growing line of I/O expansion modules.
Read More About Universal Expansion Ports
Retail Software
RS232 Relays
USB Relays
ZB ZigBee Relays
Bluetooth Relays
Fiber Optic Relays
Web Relays
WiFi Relays
Contact Information
