Mirror Modules
Control Relays Without a Computer
|
Like a Remote Control for NCD Relay Boards
Mirror Modules will change the way you look at computer control FOREVER. If you like our products, but don't want to use a computer to control them, then consider using a Mirror Module instead of a computer! Mirror Modules have many features, but their primary function is to act as a remote control for our extensive line of relay controllers. Mirror Modules have built-in contact closure inputs. When these inputs are connected together, the Mirror Module generates control commands used to activate relays in a remote location. Contact Closures on one side and Relay Controller on the other. Mirror Modules are compatible with ALL NCD relay controllers.
Summary Mirror Modules
- Control Relays without the use of a Computer
- Control Remote Wireless Relays from Contact Closure Inputs
- Controls up to 24 Different Relay Controllers
- Control up to 256 Different Relays
- Contact Closure Inputs on One Side, Contact Closure Outputs on the Other Side
- CPU status LEDs show command processing Activity
- RoHS option available
|
This video demonstrates how a 802.15.4 Wireless Mirror Module can be used to Remotely Control Wireless Relays. The following devices were used in this Video (in order of appearance):
ZSCAN16_MIRROR,
ZR15,
ZR120,
ZR230,
ZADR410PROXR,
ZADR85PROXR. We used the
XR16OCLP to display the Status of Remote Relays. |
| |
ZSCAN16PROXR_MIRROR |
802.15.4 Wireless Mirror Modules
If you have an application that requires remote control of relays (switches) without a computer, this device may be the answer you are looking for. 802.15.4 Wireless Mirror Modules act as a remote control for any of our Wireless 802.15.4 Wireless Relay Controllers. Simply connect buttons, switches, and sensors directly to the 802.15.4 Wireless Mirror Module. Any change detected on the inputs are transmitted to the remote relay controller. For more information on 802.15.4 Wireless Mirror Modules
click here.
MirX Relay Pair Series Controllers |
No Computers, No Configuration, Works Right out of the Box |
Every MirX controller is equipped with contact closure inputs and outputs. The inputs on one controller activate the relays on the remote device using wireless communications. The "X" in MirX refers to the crossover. Since both devices are equipped with contact closure inputs and relays, each device targets and controls the remote device.
MirX devices are only sold as a permanently married pair, pricing shown on our web site indicates pricing for the pair of controllers. Contact Closure Inputs may only be connected to switches, buttons, or sensors with Contact Closure capability. Not suitable for use in voltage detection applications.
Our MirX Relays relays are always sold in married pairs and feature
SPDT & SPST and Solid State relays and are available with the same number of contact closure inputs/outputs as there are relays installed on the board. The MirX Series Relay Controllers are ready to go to work immediately out of the box. No Computers, No Configuration, Just Simple, Reliable 802.15.4 Wireless Communications between two devices that permanently work together as a married pair. |
 |
|
|
Retail Software
RS232 Relays
USB Relays
ZB ZigBee Relays
Bluetooth Relays
Fiber Optic Relays
Web Relays
WiFi Relays
Contact Information
